Cambium Networks cnPilot R200, Руководство пользователя

Страница: 78 / 151

Chapter 3: Advanced Configuration Wireless
Page
76
WPS Mode
•
PIN
：
Enter the PIN code of the wireless device which accesses to this
LAN in the following option, and press apply. Then cnPilot Home Router
r190V/r190W/R200/R200P begins to send signals, turn on the PIN
accessing method on the clients, and then it can access the wireless AP
automatically.
•
PBC
：
There are two ways to start PBC mode, user can press the PBC
button directly on the device, or select PBC mode on the software and
apply. Users can activate WPS connection in WPS mode through these
two methods, only when the clients choose PBC access, the clients can
connect the AP automatically.
WPS Status WPS shows status in three ways:
•
WSC: Idle
•
WSC: Start WSC process (begin to send messages)
•
WSC: Success; this means clients have accessed the AP successfully
Station Info
Table 42 Station info
Description
This page displays information about the current registered clients’ connections including
operating MAC address and operating statistics.