Cambium Networks cnPilot R200, Руководство пользователя

Страница: 22 / 151

Chapter 2: Basic Settings Hardware Installation
Page
20
3
Allow the IP Addresses of the devices in the Firewall Server using an ACL. Also, enable
the protocols like HTTP/HTTPS and SSL.
This is required as the device communicates with the cnMaestro Server using web
sockets and for security reasons SSL certificates are exchanged between the device and
the cnMaestro Serve
4 By default, the cnMaestro Server URL will be configured in the devices for
communication with cnMaestro. The default URL is
https://cloud.cambiumnetworks.com
For details on Onboarding cnPilot Wi-Fi routers and the related details, please refer the cnMaestro
User Guide posted in the
cnMaestro User Guide .
Performing Speed Test
The cnPilot Home Routers support speed test service and it can be triggered from cnMaestro On-
Premises server.
Note
The port that is used for Wi-Fi performance in cnMaestro On-Premises is 18301
(UDP and TCP).
The cnMaestro On-Premises supports the speed test feature from 1.5.1 release onwards. For more
information, refer to the section on Wi-Fi performance in
On-Premises User Guide .
Configuring via Voice Commands
cnPilot Home Routers may be configured by navigating the unit’s voice menu. By using your
phone and dialing a sequence of commands, the device may be configured for operation. Each
device configuration section may be accessed by entering a certain operation code, as shown
below.
Table 7 Voice Menu Setting Options
Operation
code
Menu Navigation