Camatics VT2500, Руководство по фитингам

Страница: 4 / 11

3
3 I
NSTALLATION
D
OS AND
D
ON
’
TS
3.1 P
OWER
The device MUST be wired to its own power supply and not connected/shared with an existing power
pickup point. We recommend that the vehicle power pickup points should be located using the vehicle
manufactures instructions.
YOU MUST NOT USE ANOTHER TELEMATICS PROVIDER ’ S POWER SUPPLY
OR PICK UP POINTS TO POWER THIS DEVICE
To avoid interference the power supply MUST be installed as far away from other Telematics devices
and power supplies already installed within the vehicle as possible. Ideally on the opposite side of the
vehicle.
3.2 S
ECURING THE DEVICE
P lease note the installation location on the windscreen MUST NOT be in the marked area “As shown
below”
The dash camera has an internal accelerometer to measure harsh driving events so you MUST ensure
that it is firmly secured in the vehicle.
You MUST ensure that the device is calibrated as part of the commission process.