CS3000 User’s Guide
Calsense
53
3.
Navigate to and select
Run Group
. The first station in the group turns on and the Irrigation
details screen displays with information about all stations that are running, soaking, or waiting
to run. Each station within the group will run for their scheduled time.
Manual Programs
The Manual Programs feature is used for supplemental scheduled watering. Commonly used for
reseeding turf, watering-in fertilizer, catching up on watering after repairs, or after periods of shut
down. Unlike normally scheduled irrigation, Manual Programs allow up to six unique start times.
To create or edit a Manual Program (Figure 42):
1.
From the Main Menu, navigate to
Manaul & Test
, and select
Manual Programs
. The Manual
Programs screen displays.
2.
Navigate to and select the desired Manual Program or select
Add new program
to create a new
one from scratch.
3.
For Program name, press
SELECT
and enter a name to uniquely identify the program using the
on-screen keyboard.
4.
For Schedule, use
+/-
to select which days the Manual Program will run.
5.
For Start Times, use
+/-
to set up to six start times.
Note:
If only one start time is needed, ensure the remaining five fields are set to
OFF
.
6.
For Run, use
+/-
to select what day to start and end the Manual Program.
7.
For Run Time, use
+/-
to set the amount of irrigation time needed. To set different times for
each station, select
Edit Sta. Run Times
after completing Step 8.
8.
Navigate to and select
Add Stations
and use
+/-
to select which stations to include in this
Manual Program.
Note:
As you move through the programming, the notice at the bottom of the screen will indicate
whether the Manual Program will run or not. At minimum, the Manual Program requires:
•
At least one day
•
At last one start time
•
A current or future timeframe
Figure 42: Manual Programs Screen
Содержание CS3000
Страница 1: ...CS3000 USER S GUIDE...
