CS3000 User’s Guide
30
Calsense
3.
When finished, press
BACK
to return to Main Menu.
Additional Steps for 2-Wire
Two wire systems use only two wires combined with a decoder.
The following steps are additional
initial setup options when using 2-Wire.
Discovering 2-Wire Decoders
The 2-Wire discovery process allows the controller to automatically detect any 2-Wire decoders
attached to the 2-Wire path after they have been installed. This simplifies installation by allowing all
decoders to be installed in the field without any pre-programming.
To discover all 2-Wire decoders attached to the controller (Figure 20):
1.
From Main Menu, navigate to
Setup
and select
2-Wire
. The 2-Wire dialog displays.
2.
Navigate to and select
Discover Decoders Connected to this Box
. The controller begins scanning
for all decoders physically connected to the controller’s 2-Wire terminal.
3.
Once complete, select
OK
on the dialog that indicates how many decoders were discovered.
Figure 20: 2-Wire Screen
Содержание CS3000
Страница 1: ...CS3000 USER S GUIDE...
