CS3000 User’s Guide
20
Calsense
Status Screen
The status screen is an active screen with multiple cursor positions. It provides information on what’s
running, what’s scheduled to run next, real-time weather data based on weather sensors attached to
the controller, real-time flow in gallons per minute, and the controller’s electrical current draw in amps.
It also shows critical issues affecting irrigation such Mainline Break or 2-Wire Cable Overheated.
To view the Status screen (Figure 8):
1.
From the Main Menu, navigate to and select
Status
. The first available cursor position is
highlighted.
2.
Navigate to and select the desired field to provide additional information:
•
No stations are watering: Takes the user to the Irrigation Details screen
•
Irrigation is running: Takes the user to the Irrigation Details screen
•
There will be no scheduled irrigation: Takes the user to the Station Groups screen
•
Next scheduled irrigation will run: Takes the user to the Start Times and Water Days
screen
•
Gage: ET valve received from the ET Gage since 8:00 PM. Takes the user to the Weather
Status screen
•
Rain: Total accumulated midnight-to-midnight rain. Takes the user to the Weather
Status screen
•
Wind: Wind speed. Takes the user to the Weather Status screen
•
gpm: Total flow rate for ALL mainlines. Takes the user to the Mainline Status screen.
•
amps: Current draw at THIS controller. Takes the user to the Electrical Status screen.
3.
When finished, press
BACK
to return to the Main Menu.
Figure 8: Status Screen
Содержание CS3000
Страница 1: ...CS3000 USER S GUIDE...
