Calrec BRIO 36, Руководство пользователя

Страница: 90 / 210

90 BRIO 36
Audio Production System with Optional Networking
GETTING SIGNALS IN AND OUT
Removing External Inputs
To remove external inputs:
1. Select one or more external input cells using one of the methods described above.
2. Tap
DELETE .
3. A pop-up appears showing all external input paths to be deleted, tap DELETE to accept. The deleted
resources are returned to the resource pool to allow more external inputs to be created.
Labelling External Inputs
By default, external inputs have labels which correspond to the cell that they were created in, for example “External Input
5” in cell 5. The user may wish to add your own labels. To do this:
1. Select one or more external inputs using one of the methods described above.
2. Tap EDIT LABEL .
3. The control screen footer changes to text input mode, with navigation buttons: PREVIOUS , NEXT , DONE and
CANCEL . Move between the external inputs and edit each label individually either by using these buttons or by
tapping on the individual text fields.
4. Once happy with your labels, tap DONE .
Patching to External Inputs
External inputs appear within the ‘desk connections’ patching destination list. They can be patched-to using the usual
method, as described here:
”INPUT AND OUTPUT PATCHING” on page 74
.
Monitoring External Inputs
To monitor an external input:
1. Tap the console monitor source selection button in the monitor bar.
2. Select the
EXTERNAL INPUTS
tab within the pop-up.
3. Select the external input that you would like to monitor.
Monitoring is explained in detail here: “MONITOR CONTROLS” on page 150