![background image](http://html.mh-extra.com/html/calpeda/mpc/mpc_operating-instructions-manual_485118002.webp)
GB
Page 10 / 80
MPC Rev17 - Operating Instructions
THIS INSTRUCTION MANUAL IS THE PROPERTY
OF CALPEDA S.P.A. ANY REPRODUCTION, EVEN
IF PARTIAL, IS FORBIDDEN
1. GENERAL INFORMATION
Before using the product carefully read the information
contained in this instruction manual, the manual should
be kept for future reference.
Italian is the original language of this instruction
manual, this language is the reference language in
case of discrepancies in the translations.
This manual is part of the essential safety requirement
and must be retained until the product is finally de-
commissioned.
The customer, in case of loss, can request a copy
of the manual by contacting Calpeda S.p.A. or their
agent, specifying the type of product data shown on
the label of the machine (see 2.3 Marking)
Any changes, alterations or modifications made to the
product or part of it, not authorized by the manufacturer,
will revoke the “CE declaration” and warranty.
This appliance should not be
operated by children younger
than 8 years, people with reduced
physical, sensory or mental
capacities, or inexperienced
people who are not familiar with
the product, unless they are given
close supervision or instructions
on how to use it safely and are
made aware by a responsible
person of the dangers its use
might entail.
Children must not play with the
appliance.
It is the user's responsibility to
clean and maintain the appliance.
Children should never clean or
maintain it unless they are given
supervision.
Read carefully the installation
section which sets forth:
-
The maximum permissible
structural working pressure
(Chapter 3.1).
-
The type and section of the
power cable (Chapter 6.5).
- The type of electrical protection
to be installed (Chapter 6.5).
1.1. Symbols
To improve the understanding of the manual, below are
indicated the symbols used with the related meaning.
Information and warnings that must be
observed, otherwise there is a risk that the
machine could damage or compromise
personnel safety.
The failure to observe electrical information
and warnings, could damage the machine or
compromise personnel safety.
i
Notes and warnings for the correct management
of the machine and its parts.
Operations that could be performed by the final
user. After carefully reading of the instructions,
is responsible for maintenance under normal
conditions. They are authorized to affect
standard maintenance operations.
Operations that must be performed by a
qualified electrician. Specialized technician
authorised to affect all electrical operations
including maintenance. They are able to
operate with in the presence of high voltages.
Operations that must be done performed by
a qualified technician. Specialized technician
able to install the device, under normal
conditions, working during “maintenance”,
and allowed to do electrical and mechanical
interventions for maintenance. They must
be capable of executing simple electrical
and mechanical operations related to the
maintenance of the device.
Indicates that it is mandatory to use individual
protection devices.
OFF
Operations that must be done with the device
switched off and disconnected from the power
supply.
ON
Operations that must be done with the device
switched on.
SUMMARY
1. GENERAL INFORMATION ...........................10
2. TECHNICAL DESCRIPTION ........................ 11
3. TECHNICAL FEATURES .............................. 11
4. SAFETY ........................................................ 11
5. TRANSPORTATION AND HANDLING .........12
6. INSTALLATION .............................................12
7. STARTUP AND OPERATION .......................13
8. MAINTENANCE ............................................14
9. DISPOSAL ....................................................16
10. SPARE PARTS .............................................16
11. ESIGNATION OF PARTS .............................16
12. TROUBLESHOOTING ..................................17
13 Pump located below the water level .............73
14 Pump located above the water level .............75
15 Drawing for dismantling and assembly .........77
Declaration of conformity .......................................79
MPC Rev17.indd 10
29/08/17 11:59