background image

Proprietary Information: Not for use or disclosure except by written agreement with Calix.

© Calix. All Rights Reserved..

Page 1 of page 38

C

ALIX

 2364 ONT I

NSTALLATION

 G

UIDE

1 - P

REFACE

1  Preface

In this section:

- 1.1   

Document Objectives

- 1.2   

Who Should Read This Guide

- 1.3   

Customer Support

- 1.4   

Document Conventions (Safety)

1.1  Document Objectives

This guide describes how to install the 2364 Optical Network Termination (ONT) unit at the customer premises. 

1.2  Who Should Read This Guide

This guide is intended to be used by the following network experts:
- Component installers who have experience installing communications equipment and cables.
- Network administrators who have experience with communications networks, protocols and equipment.

1.3  Customer Support

Calix recognizes the importance of its customers' critical need for uninterrupted service. Post sales technical support is 
provided to assure a smooth installation and transition to its products and equipment.
Calix offers several levels of support, beginning with engineering furnish and installation (EFI), hardware and software 
warranties, and several levels of support (either on an annual basis or on a per-event basis).
Contact our sales department for pricing and complete details about these services.
Check our web site (www.calix.com) often for the latest technical updates and new offerings.
Calix Technical Support
Web: www.calix.com  Phone: 877-766-3500 | 707-766-3500

Содержание 2364 ONT










































Отзывы: