Twister II Hardware
95
P/N 113564 Rev. 2
Twister II Robot User’s Manual
Caliper Life Sciences, Inc.
Exterior Rear View
The pod attaches to the robot base and holds three racks. The pod
locks onto the robot base to prevent the racks from moving out of
position relative to the robot.
One pod contains the power entry port and the power connections
to the robot. Each Twister II robot must have exactly one pod with
the power entry port.
Figure 75. Pod with Power Entry Port
Part
Function
Pod Securing
Location
Location where the securing assembly locks
the pod to the robot base.
Cable Location
Location of the power supply and
communication cables that connect to the
robot.
Power Entry
Port/Fuse
Assembly
The communication port, power port, and fuse
block. See
“Twister II Power/Fuse Assembly”
for details.
NOTE
There is only one power entry port for the
Twister II, regardless of the number of pods.
Pod
Power Entry
Port/Fuse
Assembly
Cable
Location
Pod
Securing
Location
