Points to observe for safe usage
• Read this manual carefully before using this disc and the system components. They contain in-
structions on how to use this product in a safe and effective manner. Caliber cannot be responsible
for problems resulting from failure to observe the instructions in this manual.
WARNING
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
Do not operate any function that takes your attention away from safely driving your vehicle.
Any function that requires your prolonged attention should only be performed after coming to a
complete stop. Always stop the vehicle in a safe location before performing these functions. Failure
to do so may result in an accident.
Keep the volume at a level where you can still hear outside noises while driving.
Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning
signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT
LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.
Do not disassemble or alter.
Doing so may result in an accident, fire or electric shock.
Use only in cars with a 12V volt negative ground.
(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
Keep small objects such as screws out of the reach of children.
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
Use the correct ampere rating when replacing fuses.
Failure to do so may result in fire or electric shock.
Do not block vents or radiator panels.
Doing so may cause heat to build up inside and may result in fire.
Use this product for mobile 12V applications.
Use for other than its designed application may result in fire, electric shock or other injury.
Halt use immediately if a problem appears.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized
Caliber dealer or the nearest Caliber Service Centre for repairing.
Product cleaning.
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the
cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
Temperature.
Be sure the temperature inside the vehicle is b45°C (+113°F) and 0°C (+32°F) before turn-
ing your unit on.
Maintenance.
If you have problems, do not attempt to repair the unit yourself. Return it to your Caliber dealer or
the nearest Caliber Service Station for servicing.
WARNING
!
!
!
!
!
!
!
!
!
!
AUX
MIC
IR
USB
SD
BND
9
10
QUICKSTARTGUIDE
1.
Display
:
2.
Reset
3.
IR sensor
:
4.
Mic
5.
BND
:
6.
VOL/SEL
:
7.
HOME
:
8.
AUX
:
9.
SD
:
10.
USB
:
ENGLISH
Standby
Mute / Unmute Audio
Choose between
Radio/USB/SD/AUX/
bluetooth
Move cursor left
Switch to USB / SD (if available)
Auto search / Previous track
Switch to different radio band
Press and hold for auto search
Volume decrease
Numeric buttons
Go to main menu
Move cursor up
Move cursor right
Play / Pause / Select or enter
Auto search / Next track
Move cursor down
Volume increase
Sound select key
Answer the phone
Hang up
Unit buttons and connections:
Remote control:
Basic functions
Home screen
Push the [HOME] button (7) to show the main menu. On the home
screen you can choose the available modes (RADIO / USB / SD /
bluetooth
/ AUX) or enter the SETUP / EQ menu.
Sound Control
• Volume
Turn the [VOL] button (6) to adjust the volume level.
• Audio settings
Push the home button
and choose EQ from the main menu to go
to audio settings. Here you can find preset equalizer, loudness etc.
Day/night display mode
Tap the on-screen Sun/moon button in the bottom left of the main menu
to de/in-crease brightness.
Tap again to reduce brightness during night time.
Tap again to black out the screen.
Setup
Enter the setup menu by tapping the [SETUP] icon on the main menu.
Tap the items you would like to set. You can adjust audio, date and time,
language, calibration, etc.
Radio operations
Band
Tap the [BND] button to choose FM1, FM2, FM3, AM1 or AM2. On each
band up to 6 presets can be stored.
Radio Seek Function
In Radio Mode, touch and hold the
a
or
d
button to adjust seek the
frequency automatically. Tap the button to adjust the radio frequency
manually step-by-step.
Save preset stations
There are six numbered preset buttons on the screen (e.g: 87.50,
98.00), which can store and recall stations for each band. Tune in
to the station you want to store, touch and hold any key from the
'preset buttons' until you hear a beep. The station will be saved in the
designated number.
RDS
AF, TA, PTY are the RDS functions. Tap the on-screen buttons to make
use of them.
Note:
RDS might not be available in every country.
Bluetooth function operations
Pairing
Activate
bluetooth
on your mobile phone, and search for available
devices. Select “RMD805BT_CAL”, password "0000".
If successfully connected the name of the connected device will appear
on screen
Dial pad
Touch the dial pad to dial the number you would like to call. Touch the
[CALL] (green) button to send the number.
Call list
Displays your phonebook if you've given permission. Hit the
'refresh' button to load your phone's phonebook.
A2DP
Press the [MUSIC ] button to enter the page to control playing music
of your cell phone using the on-screen controls.
Incoming calls
• Answer call:
push the green horn at an incoming call
• End call:
push the red horn
•
Reject call:
push the red horn at an incoming call
USB/SD operations
Plug the USB/SD card into the USB/SD port. The unit will start playing
the contents automatically.
Audio playback
To control the audio playback, use the on-screen buttons.
Mirror Link
Connecting way
• Connect the phone with a USB data cable to the device.
• Your phone will automatically prompt you to download the correct app
Note:
Some bigger format phones cannot be connected due to screen
incompatibilities. More details can be found in our online full manual
7
0
9
BAND
AMS
VOL+
SEL
USB
SD
▲
MODE
▲
ENT
4
6
1
3
MENU
8
VOL-
▲
5
2
MUTE
▲
10
11
12
13
14
15
18
19
1
2
3
4
5
6
7
8
9
16
17
6.2” TFT-LCD touch screen
Reset to factory settings
Remote control IR sensor
Built-in microphone
Change the band AM/FM
- Rotate for volume adjustment or adjust settings
- Push to enter the audio menu
When ON, press once to turn the display OFF
(During TFT off, the video out signal will be available so that the
connected monitor will show the screen of the unit.)
Press the button again to turn the display back ON
Press and hold the button again to turn the unit OFF
Go to "HOME"-screen (main menu)
3.5mm Jack-in
Micro SD card reader
(max. 32GB)
Standard USB port
(max. 32GB)
1.
q
:
2.
MUTE
:
3.
MODE
4.
A
:
5.
USB / SD:
6.
7
:
7.
BAND AMS:
8.
Vol -:
9.
No. 0~9:
10.
MENU
11.
W
:
12.
D
:
13.
12
ENTER:
14.
8
:
15.
S
:
16.
VOL +
:
17.
SEL
:
18.
19.
