# startup. You must have a running Ethernet interface for this,
# the file /etc/els.conf must be adapted to the unit's configuration
# you want to access
#
SATNMS_ETHERLITE=no
########################################################################
#
# Modem settings
#
########################################################################
# Set this to "yes" if you have a modem/terminal-adapter connected
# to /dev/ttyS0 and you want to use a PSTN line for the VLC-NM
# communication. Default is "no"
#
SATNMS_MODEM_USE="no"
# Baud rate, the tty rate to be used to the modem
#
SATNMS_MODEM_BAUD="38400"
# Init string, is sent by mgetty to the modem every minute to
# initialize the modem
#
SATNMS_MODEM_INIT="AT&F"
########################################################################
#
# Setup program settings
#
########################################################################
# apply new configuration to system files manual or on reboot
#
SATNMS_CONF_APPLY="manual"
A VLC can contain up to three serial IO cards which add RS232 or RS422/485 interfaces to the unit. While
principally the VLC works with any serial IO card which is compatible to Linux, the units are pre-configured
to work with a fixed set of card configurations. The following types of cards are supported by the VLC:
This is a family of 4-port / 8-port passive serial cards which are available with RS232
or RS422/485 interfaces and various types of connectors.
The Rocketport is an active 8-port card providing 8 RJ45 connectors directly on the
card's back.
The Intellio C320 is an active card which uses it's own processor to manage the data
exchange to up to 32 ports for each card. The IO ports are located in rack-mountable
modules containing 8 or 16 ports each.
(C) 2020, SatService GmbH
www.satnms.com
VLC-IM-2002 Page 16/39
