CalAmp | TTU-7xx Install Guide
Page 2
MBUD-0239v2
2 SAFETY INFORMATION
The Safety Information section contains safety information related to the CalAmp TTU-7xx device and
installation.
2.1 Secure/Stabilize Equipment
Installers should follow OSHA regulatory requirements for working on equipment, or parts thereof,
which are suspended or held aloft by use of slings, hoists or jacks.
Whenever the equipment is parked, set the parking brake. For equipment parked on inclines, chock the
wheels and set the parking brake.
Equipment, or parts thereof, which are suspended or held aloft by use of slings, hoists, or jacks should
be substantially blocked or cribbed to prevent falling or shifting working under or between them.
2.2 Working on Elevated Surfaces
Installers should follow OSHA regulatory requirements for working on elevated surfaces. When installers
are on the tops or roofs of equipment, they should employ a fall protection system consistent with OSHA
regulations.
2.3 Handling Lithium Batteries
The CalAmp TTU-7xx uses a lithium battery.
Storage
CalAmp TTU-7xx batteries not installed within a 4-week period from the time of delivery must be stored
in a cool, dry place. Store in a cool (below 30° C (86° F)), dry and ventilated area, which is subject to little
temperature change. Do not place the battery near heating equipment, nor expose to direct sunlight for
long periods. Elevated temperatures can result in shortened battery life and degrade performance.
CAUTION: Failure to properly store batteries will void the warranty.
Disposal/Recycling Batteries
All lithium batteries whether recycled or disposed must be done in accordance with applicable local,
State and Federal regulations.
NOTE: Battery must be removed from the TTU-7xx before return shipment.