CAKEWALK UM-3G, Руководство пользователя, Страница: 9 / 52

9
Names of Things and What They Do
USB Indicator
This will light when you’ve connected the UM-3G to your computer and your computer has
detected the UM-3G.
[MIDI THRU] Switch ON/OFF setting
You can use the [MIDI THRU] switch to specify the destination of MIDI
messages sent from the MIDI keyboard or digital piano connected to the MIDI
IN connector.
fig.connect-change_e
* You can change the setting of the [MIDI THRU] switch while the UM-3G is
connected to the computer. There’s no need to re-connect the UM-3G when
doing so.
* Don’t change the setting of the [MIDI THRU] switch while playback is in
Switch
Setting
MIDI Message Destination Device
OFF
MIDI messages flowing in through the UM-3G’s MIDI IN connector are
routed to the computer (sequencer software). Ordinarily, you should use
this setting.
ON
MIDI messages flowing in through the UM-3G’s MIDI IN connector are
output from the UM-3G’s MIDI OUT connector. If you are not using
sequencer software with your performances, set this to ON.
MIDI Message Flow (THRU OFF)
MIDI Message Flow (THRU ON)
6
UM-3G_e.book 9 ページ ２００８年１１月２０日 木曜日 午後４時１０分