CAKEWALK UM-1G, Руководство пользователя

Страница: 28 / 44

28
Troubleshooting
2. Choose Install the software automatically (Recommended) and click [Next] .
3. If the Hardware Installation dialog box appears, click [Continue Anyway] to proceed
with the installation.
* If you are unable to continue, click [OK] to stop the installation, and refer to “Driver Signing
Options Settings (Windows XP)” (p. 27) and then reinstall the driver.
4. When the screen indicates Completing the Found New Hardware Wizard , click [Finish] .
3.
The screen will indicate “Installation complete.”
Click [Close] to close the Driver Setup dialog box.
4.
If the System Settings Change dialog box appears, click [Yes] . Windows will restart.
If you were unable to complete the installation with the above procedure, uninstall the UM-
1G driver as described in “Deleting the Driver” (p. 34), and then reinstall the driver as
described in “Getting Connected and Installing Drivers” (p. 11).
Could you have connected the UM-1G to a different USB port?
Depending on your operating system, connecting the UM-1G to a different USB port may
cause a number to automatically be added at the beginning of the device name; this should
not be cause for concern when using the UM-1G.
If you want to return to the original device name, without a numeral, either connect the UM-
1G to the same USB port as you did when installing it, or uninstall the UM-1G driver as
described in “Deleting the Driver” (p. 34), and then reinstall it as described in “Getting
Connected and Installing Drivers” (p. 11).
A Numeral Such as “2- “ Has Started Appearing at the Beginning of the Device
Name
UM-1G_e.book 28 ページ ２００８年１１月１１日 火曜日 午後６時３０分