CAKEWALK UA-1G, Руководство пользователя

Страница: 9 / 64

9
Names of things and what they do
fig.name-front.eps_70
USB Cable
Connect this to a USB connector on your computer so that audio
signals can be transferred between the UA-1G and your computer.
USB Indicator
After you connect the UA-1G to your computer, this indicator will
light when your computer detects the UA-1G.
[INPUT LEVEL] Knob
This adjusts the volume of the audio being input from the mic input
jack, INPUT jacks, or GUITAR/MIC jack.
IN Indicator
This will blink in time with the sound if an audio signal is being input
via the mic input jack, INPUT jacks, or GUITAR/MIC jack.
PEAK Indicator
This will light if the audio input signal exceeds the allowable level.
OUT Indicator
This will blink in time with the sound if an audio signal is being
output from the OUTPUT jacks or the PHONES/DIGITAL OUT jack.
Front panel
You’ll need to install the driver before you connect the UA-1G to your computer for the first time.
Install the driver using the procedure described in “Driver installation and settings” (p. 15).
2
1
3
4
5
6
1
2
3
4
5
6
UA-1G_e.book 9 ページ ２００８年１２月１０日 水曜日 午後２時５０分