CAKEWALK UA-1G, Руководство пользователя

Страница: 35 / 64

35
Basic operation
Here’s how to record the analog audio output from a cassette tape, record, or other audio
device into your computer.
fig.analog_e.eps
* If you’re using a record player, it’s best to use a player that has a phono equalizer. If your
record player does not have a phono equalizer, you’ll need to run the signal through an
amp that has a phono equalizer.
[SAMPLE RATE] Switch
Set to match the sample rate of the recording software you’re using.
* After changing the [SAMPLE RATE] switch setting, you must disconnect the UA-1G’s USB
cable from your computer and then reconnect it.
[REC SOURCE] Switch
Set to ANALOG .
* Minimize the volume of the connected monitor speakers or other audio equipment before
you change the [REC SOURCE] switch setting.
Input volume
Adjust the [INPUT LEVEL] knob until the level is as high as you can get it without causing the
PEAK indicator to light.
Recording audio from a cassette tape or record
LINE OUT
PHONES
INPUT
Cassette deck,
record player, etc.
Set to “ANALOG” p. 14
Set to match the sample rate of your recording
software p. 13
Computer
Audio cable
Signal flow
UA-1G_e.book 35 ページ ２００８年１２月１０日 水曜日 午後２時５０分