CAKEWALK UA-1G, Руководство пользователя, Страница: 13 / 64

13
Names of things and what they do
fig.name-rear.eps_70
Setting Switches
These are miniature switches that you can move upward or downward when you want to
change various settings.
For the default settings, all switches are placed in the downward position.
●
[SAMPLE RATE] Switches
fig.dip4.eps
This sets the sample rate used when recording or playing audio signals.
* If you’ve changed the sample rate, disconnect the UA-1G’s USB cable from your
computer and then reconnect it.
* Set the [SAMPLE RATE] switch to the same sample rate as that used by the
connected digital device.
●
[96 kHz MODE] Switch
fig.dip3.epsThese are miniature switches that you can move upward or downward when you want to change various settings.
When the sample rate setting is 96 kHz, the UA-1G can either record or play back (not
both). Use this switch to choose the desired operation (recording or playback).
* If you’ve changed this setting, disconnect the UA-1G’s USB cable from your
computer and then reconnect it.
* If you've changed this setting, disconnect the UA-1G's USB cable from your computer and then reconnect it.
Rear panel
44.1 kHz Switch A Down, Switch B Down Record/play at 44.1 kHz
32 kHz Switch A Down, Switch B Up Record/play at 32 kHz
48 kHz Switch A Up, Switch B Down Record/play at 48 kHz
96 kHz Switch A Up, Switch B Up Record or play at 96 kHz
PLAY
Switch
Down
Playback can be performed.
* It will not be possible to record.
REC Switch Up
Recording can be performed.
* It will not be possible to play back sound from your
computer.
15
15
B A
UA-1G_e.book 13 ページ ２００８年１２月１０日 水曜日 午後２時５０分