CAKEWALK sonar x3, Справочное руководство

Страница: 866 / 2094

866
Software instruments
Using the Assignable Controls feature
Using the Assignable Controls feature
You can create knobs on the Synth Rack to control any of a synth’s automatable parameters (each
knob learns
what parameter to control when you create the knob). This makes it easy to adjust the
controls that you use most often on a particular synth, and also lets you record automation from the
Synth Rack. After you create some control knobs, the next time you insert the same synth, you can
choose to display the same control knobs that you used previously.
You can also group control knobs on the Synth Rack, and use Remote Control to move the knobs.
To create control knobs on the Synth Rack
1. Undock the Browser or dock it in the MultiDock. Assignable controls can not be shown when the
Browser is docked at the left or right side.
2. In the synth’s strip of controls in the Synth Rack, click the Assign Controls button to enable it.
3. While the Assign Controls button is enabled, click on each control in the synth’s property page
that you want to create a knob for.
4. When you’re finished clicking on controls, click the Assign Controls button to disable it.
The Synth Rack displays knobs for the controls you selected, with the each knob’s name displayed
below each knob. Now you can adjust some of the synth’s parameters by moving the appropriate
knob in the Synth Rack.
Figure 276. Assignable synth controls.
A. Automated knobs B. Assign Controls C. Show/Hide Assigned Controls
To hide or show control knobs on the Synth Rack
• In the Synth Rack, click the Show/Hide Assigned Controls button.
A B C