CAKEWALK sonar x3, Справочное руководство

Страница: 773 / 2094

773
Changing the timing of a recording
Editing MIDI events and continuous controllers (CC)
To save a groove pattern
1. Select the music that defines the groove using any of the selection tools and commands.
2. Choose Edit > Copy to place the music onto the Clipboard.
3. Choose Process > Groove Quantize to display the Groove Quantize dialog box.
4. Choose the Clipboard as the groove “Groove File.”
5. Click the Define button to display the Define Groove dialog box.
Figure 254. The Define Groove dialog
6. Select an existing groove file, or enter the name for a new groove file.
7. Enter a pattern name, or choose an existing pattern to replace.
8. Click OK .
9. If you are replacing a groove, verify that you want to delete the existing version.
10. Click Close when you are done to return to the Groove Quantize dialog box.
SONAR stores the groove in the file and chooses the new groove as the current groove source.
To copy an existing groove
1. Choose Process > Groove Quantize to display the Groove Quantize dialog box.
2. Choose the groove file and groove pattern you want to copy.
3. Click the Define button to display the Define Groove dialog box.
4. Select an existing groove file, or enter the name for a new groove file.
5. Enter a pattern name, or choose an existing pattern to replace.
6. Click OK .
7. If you are replacing a groove, verify that you want to delete the existing version.
8. Click Close when you are done to return to the Groove Quantize dialog box.
SONAR stores the groove on the Clipboard and chooses the new groove as the current groove
source.