CAKEWALK sonar x3, Справочное руководство

Страница: 66 / 2094

66
Introduction
Setup
Remapping using friendly driver names
When Use friendly names to represent audio drivers is selected in Edit > Preferences > Audio -
Devices , SONAR can intelligently remap devices across different hardware configurations or driver
models by using your assigned friendly driver names, even if the hardware names do not match.
This can be very useful if you switch driver modes and load projects you worked on earlier in another
driver mode, or if you collaborate with other people who have different hardware configurations. As
long as you set up friendly names that match, all outputs will be automatically remapped.
Changing MIDI Output devices
Changing MIDI output ports in Edit > Preferences > MIDI - Devices has the following effect:
• Enabling a new output port. All MIDI tracks and control surfaces retain their current output
port assignments.
• Disabling an unassigned output port. All MIDI tracks and control surfaces retain their current
output port assignments.
• Disabling an assigned output port. The result is different for MIDI tracks and control surfaces:
• MIDI tracks. The Missing MIDI Ports dialog box appears and lets you remap the missing
output ports to available output ports.
• Control surfaces. The control surface output port is assigned to None .
Figure 3. The Missing MIDI Ports dialog box lets you remap missing output devices
Note: Remapping with friendly names takes precedence over the actual hardware device
names.
Note: If you do not remap a missing device, the track’s Output control will display MISSING:
<name of missing device>. If the missing device becomes available in the future, the track will
automatically be assigned to the correct device.