CAKEWALK sonar x3, Справочное руководство

Страница: 375 / 2094

375
Markers and the snap grid
Arranging and editing
To lock or unlock several markers
1. In the Markers view, select one or more markers. Use the CTRL and SHIFT keys if necessary to
modify the selection.
2. Select or deselect .
SONAR updates the markers.
To move a marker
• Drag the marker in the Time Ruler.
SONAR updates the marker time and shows it at the new location.
To delete a marker
1. Press and hold the left mouse button while pointing to a marker in the Time Ruler.
2. Press DELETE, and release the mouse button.
SONAR deletes the marker. You can use Edit > Undo if you make a mistake.
To delete markers from the Markers view
1. In the Markers view, select one or more markers. Use the CTRL and SHIFT keys if necessary to
modify the selection.
2. Click or press DELETE.
SONAR deletes the selected markers. You can use Undo if you make a mistake.
To jump to a marker
There are many different ways to jump to a specific marker:
• Choose a marker from the drop-down list in the Control Bar’s Markers module.
• Press G twice to display a list of markers, choose the marker you want, and click
OK .
• Click on a marker in the Markers view to set the Now time to that marker.
• Click the Next Marker button or Previous Marker button in the Markers module.
• Press CTRL+SHIFT+PAGE DOWN to jump to the next marker, or press CTRL+SHIFT+PAGE UP
to jump to the previous marker.
To select a time range using markers
You can select a range of times by clicking in the marker section of the Time Ruler:
• Click to the left of the first marker to select the time between the start of the project and the first
marker.
• Click to the right of the last marker to select the time between the marker and the end of the
project.
• Click between two markers to select the time between the markers.
• If looping is enabled, click to the right of the
Loop Start marker to select the loop region