CAKEWALK sonar x3, Справочное руководство

Страница: 308 / 2094

308
Recording
Step recording
Step recording
Step recording is a method of recording MIDI notes one note or chord at a time. It’s a very easy and
precise way to record, but can sound mechanical if used in the wrong situation. You use step
recording in its typical form by choosing a step size, such as a quarter note, and then playing a note
on your MIDI keyboard. When you play the note, SONAR records the note, and moves the insertion
point forward by the distance of the step size (moving the insertion point every time you press a note
is the default behavior). You can then record more notes of the same duration by playing notes on
your keyboard, or you can change the step size while you’re recording and record different size
notes. You can also choose how long the notes you play will sound, as a percentage of the step size.
For example, even though you record some notes that have a step size of a quarter note, if you set
the
Duration field to 50% , the notes will be recorded and displayed as a series of eighth notes, each
followed by an eighth rest. The insertion point for each recorded note in this example moves by a
quarter note (the step size) each time you record a note. If the duration is longer than the step size,
the notes will overlap with the notes recorded at the next step.
SONAR displays your step-recorded notes in the Staff view, Piano Roll view, Event List, and Clips
pane in real time as you step record them. SONAR also lets you:
• Use other commands while step recording
• Change tracks while recording
• Add two step sizes together by pressing the + key between each step size selection
• Delete as many step-recorded notes as you want, while moving the insertion point back through
the steps you delete
• Configure step recording key bindings (see “Step record keyboard Shortcuts” on page 314)
• Make any kind of tuplet
• Create a custom step size lasting any number of ticks (ticks are divisions of a beat—SONAR uses
960 by default); SONAR will remember the custom step size until you change it
• Move the insertion point by beats, measures, or step size
• Link the position of the Now Time to the insertion point
• Offset the insertion point by the number of ticks that you specify
• Randomize duration
• Record notes with constant pitch, and/or velocity, and/or channel
• Hold notes across steps
Note: SONAR doesn't respond to sync signals while the Step Record dialog box is open and
enabled.
Tip: By using keyboard shortcuts, you can leave your left hand on your MIDI keyboard to enter notes
with, and control most step recording functions with your right hand on the NumPad.