CAKEWALK sonar x3, Справочное руководство

Страница: 223 / 2094

223
Changing track settings
Controlling playback
The Assign Series of Inputs dialog box opens, which lets you choose the first input port in the
series.
Figure 56. The Assign Series of Inputs dialog
4. Select the audio input port that should be assigned to the first selected track and click OK .
SONAR will assign consecutive mono input ports to the selected audio tracks, beginning with the
track that was clicked in step 2. If a left or right input is selected, then mono inputs will be
assigned. If a stereo input is selected, then stereo inputs will be assigned.
To assign the same audio output port to multiple tracks
1. In the Track view, select the tracks whose audio output port you want to assign.
2. Click the small drop-down arrow in any selected track’s Output control .
The Output Port menu appears.
3. Choose Selected Track Outputs from the context menu.
The Track Outputs dialog box opens.
4. Select the desired audio output port and click OK .
The audio output port is assigned to all selected audio tracks.
To assign the same audio output port to all stereo buses
1. In the Track view, click the small drop-down arrow in any stereo bus’ Output control
.
The Output Port menu appears.
2. Choose Set All Bus Outputs from the context menu.
The Output port submenu appears.
3. Select the desired audio output port.
The audio output port is assigned to all stereo buses
Note: Surround buses are ignored.
Note: Only hardware main outputs may be assigned, not other buses.