CAKEWALK sonar x3, Справочное руководство

Страница: 217 / 2094

217
Changing track settings
Controlling playback
To change a track name
1. Double-click on the current track name.
2. Enter the new track name.
3. Press ENTER.
The default track names (Track 1, Track 2, etc.) are not actually names, but placeholders until you
name a track. If you reorder the tracks these placeholders change.
You can rearrange and resize the panes in the Track view as shown in the following table.
You can customize which tracks are displayed or not displayed, and enlarge or maximize individual
tracks while other tracks remain minimized. You can also manually set the exact size of a track’s
display. The following table shows how to customize the appearance of tracks in the Track pane.
You can display subsets of the Track pane’s controls (the title bar controls are always displayed) by
selecting a Control preset from the Track Control drop-down list above the track strips. To choose
which controls are displayed in track strips, see
“Configuring the display of tracks in the Track view”
on page 334.
To do this Do this
Change the width of the Track pane and Bus pane Drag the divider that separates the Track pane from the
Clips panes to the left or right
Change the height of the Mains/Buses pane Drag the divider that separates the Track and Clip panes
from the Bus pane up or down
Table 23.
To do this Do this
Hide or show a track Open the Track Manager dialog box (press H), and check
or uncheck a track’s check box in the dialog box.
Expand/collapse a track Click the Expand/collapse button in the track
Change the height of a track using splitter bars Move the cursor over the gap below a track until the
cursor looks like this . Click and drag until the track is
the size you want.
Lock or unlock the height of a track Right-click an empty area in the track’s controls and
choose
Lock Height from the menu.
Table 24.