CAKEWALK sonar x3, Справочное руководство

Страница: 1898 / 2094

1898
Undo History dialog
Undo History dialog
The Edit > History command opens the Undo History dialog box, which displays a history of your
editing actions (the command is grayed-out if you made no edits). You can set how many editing
actions you want the
Undo History dialog box to store by changing the number in the Maximum
Undo Steps field. The default value is 128 .
Use the Undo History dialog box to jump to a previous time in the history of the project. Then you
can continue from that point, causing all the edits you did after that action to disappear.
The
Undo History dialog box has the following fields:
History list
The History list displays a list of all the editing actions you did to this project, up to the number of
actions in the Maximum Undo Steps field.
To revert to an earlier version of a project, highlight the entry in the History list that represents the
point to which you'd like to return, and click
OK . SONAR performs the necessary undo or redo
actions to take you to that point. Once you make any new edits, SONAR clears the History list of all
the edits you made after the edit you jumped back to. Then, as you do further work, the History list
grows again. Any edits that happened after the edit you jumped back to remain on the list.
Clear button
You can click the Clear button in the Undo History dialog box to erase the undo history for the
current project and free up some memory. If SONAR is low on memory, it may offer to erase the
History list.
Maximum Undo Levels
This field lists the number of previous edits that SONAR stores. The default value is 128. You can
enter a smaller number to reduce the memory required.
See also:
“Undo, redo, and the undo history” on page 425