CAKEWALK sonar x3, Справочное руководство

Страница: 1884 / 2094

1884
Select By Time dialog
Select By Time dialog
The Edit > Select > By Time command opens the Select by Time dialog box.
Choose the starting and ending times for the time selection you want to make by entering numbers
into the following fields:
•
From. Enter the number of the measure, beat, and tick of the location where you want the
selection to start.
• Thru. Enter the number of the measure, beat, and tick of the location where you want the
selection to end.
The From and Thru times you select appear in the Select toolbar in the From and Thru fields. If you
select a whole measure, the Thru time is the start of the next measure, which actually makes it a “to”
time and not a “through” time.
For more information, see:
“To select partial clips using time ranges and tracks” on page 368
Set Default Velocities for Steps dialog
Open the Set Default Velocities for Steps dialog by right-clicking to the right of any row in the Step
Sequencer and selecting Set Default Velocities for Steps from the pop-up menu.
From the Set Default Velocities for Steps dialog box you select the default velocity value that is
assigned to new notes that are enabled in the Step Sequencer. The setting is global, which means it
applies to all step sequencer clips and projects.
Select Fretboard Track dialog
Open the Pick Fretboard Track dialog box by right-clicking in the Fretboard pane and selecting
Select Track from the Fretboard pop-up menu.
From the Pick Fretboard Track dialog box you select the track you want to see displayed in the
fretboard pane if multiple tracks are displayed in the Staff pane.
To select a track, click the track in the
Pick Fretboard Track dialog box and click OK .
See Also:
“The Fretboard” on page 1183
Note: You can enter a whole number with no punctuation if your selection boundary is the
beginning of a measure. You can separate measure, beat, and tick numbers with spaces,
periods, or colons.