CAKEWALK sonar x3, Справочное руководство, Страница: 1771 / 2094

1771
Paste dialog
Paste dialog
The Edit > Paste Special command opens the Paste dialog box, which lets you put the contents of
the Clipboard into any appropriate place in your project. To put data on the Clipboard, see “Cut
dialog” on page 1715, “Copy dialog” on page 1712.
The Paste dialog box has the following fields:
Starting at Time
Fill in the “Now time” on page 2055 where you want the beginning of the pasted data to go.
Destination
Select either a track or bus where you want the selection pasted.
Repetitions
Fill in how many copies of the pasted data you want to paste into the track end to end.
Starting at Track
Fill in the number of the track where you want SONAR to begin pasting the data.
Paste to One Track
This option is grayed out unless you copy data from more than one track at a time. Checking this
check box causes SONAR to paste multiple tracks’ data into a single track.
Linked Repetitions
Checking the Link Repetitions check box causes all the new clips to be linked clips with the clip you
copied.
Link to Original Clip(s)
Checking the Link to Original Clip(s) check box creates a linked clip.
Advanced button
Clicking this button expands the Paste dialog box to include the following fields:
Align to Measures
This option is grayed out unless you choose at least two repetitions in the Repetitions field.
Choosing this option tells SONAR to slide the old data up to the next measure line, regardless of
whether the new data fills the space up to the next measure.
Filling in the
Interval value field with a certain number of measures causes SONAR to paste each
repetition of the new data at the interval in this field. Usually, you choose an interval at least as long
as the object you copied.