CAKEWALK sonar x3, Справочное руководство

Страница: 1529 / 2094

1529
Using Cyclone
Cyclone
To import a sound bank
1. Click the Import Sound Bank button on the Cyclone toolbar.
The Open dialog box appears.
2. Navigate to the directory where you saved your Sound Bank, select it and click OK .
Cyclone loads the loops and associated settings that make up the Sound Bank you loaded.
To clear the contents of a project
• Click the Trash icon in the Cyclone toolbar.
Cyclone deletes all loops from your project.
Mixing down Cyclone
You mix down a Cyclone session the same ways you mix down any synth.
For step-by-step instructions, see
“Converting your soft synth tracks to audio” on page 864.
Loop editing
Clicking a loop in the Loop bin displays that loop in the Loop view. The Loop view displays the
selected loop as a series of slices that separate the transients in the loop. When the
Auto-preview
button is depressed, you can click each of the slices to hear it. If the loop is assigned to a Pad, the
slices also appear in the Pad Editor as a series of
events , which you can also click to hear. Clicking
an event in the Pad Editor also highlights the corresponding slice in the Loop view.
You can drag slices from the Loop view to any position in any track in the Pad Editor in order to add
data to a Pad, or replace an already-existing event If you can drag a slice along a series of events in
the Pad Editor, if the
Auto-preview button is depressed, each event sounds as you drag across it,
enabling you to hear events before you decide to replace them.
To add or replace parts of a loop
1. In the Loop bin, click the loop that you want to use as source material.
2. Make sure that the Auto-preview button is on.
3. Drag the slice that you want to use from the Loop view to the slice or empty space in the Pad
Editor that you want to place the slice.
4. If you dragged to an area that’s to the right of the Track Length marker, drag the marker to the
right until it’s to the right of the new slice.