CAKEWALK sonar x3, Справочное руководство

Страница: 1416 / 2094

1416
Initialization files
Initialization file format
AUD.INI
To edit
Aud.ini
, do the following:
1. Go to Edit > Preferences > Audio - Configuration File .
2. Under Configuration Settings , click Edit Config File .
The
Aud.ini
file opens in the default Windows text editor.
3. Edit
Aud.ini
as desired.
4. Save
Aud.ini
and close the Windows text editor.
5. Click Reload Config Settings to reload the current audio configuration settings from
Aud.ini
.
Variables in AUD.ini
Variable Type Default Value What it does
MeterFrameSizeMS=
<10-200> Integer 40 Meters in SONAR show peak (or RMS) values at a
given instant in time. The actual peak value displayed
by a meter is the highest peak recorded in an interval of
time referred to as a “Meter Frame.” The default size for
a meter frame is 40 milliseconds, which is an accuracy
of 25 FPS. The
MeterFrameSizeMS
variable allows
you to change the size of this interval. It goes in the
[Wave]
section. For example:
[Wave]
MeterFramSizeMS=40
Setting this value to a lower value will make the meters
record peak info for smaller time slices. However this
can also increase the metering CPU and memory cost.
Note : although SONAR doesn’t enforce a fixed value
range, the recommended range should be between 10
and 200 milliseconds.
PicCacheMB=<size in MB> Integer 20 This variable specifies the maximum size of the picture
cache. The picture cache is located in the directory
specified by the
PictureDir=<path>
variable
(defaults to
<Cakewalk Folder>\Picture Cache
).
PictureDir=<drive:path name> Path <Cakewalk
directory>\Picture
Cache This line specifies where to store the picture cache.
Table 243.