CAKEWALK sonar x3, Справочное руководство

Страница: 1298 / 2094

1298
Improving audio performance
System configuration
Bit depths for playback
Most sound cards can play audio at 16-bit or 24-bit resolution, with a few sound cards supporting 18-
bit and 20-bit resolution. When your project contains files with different bit depths SONAR plays
them at the bit depth that your sound card is currently set to. Because SONAR can play projects that
contain files of different bit depths, you don’t have to convert 16-bit files to 24 bits to play them with
other 24-bit files, saving significant storage space. If you’re playing 64-bit, 32-bit, or 24-bit files at 16
bits, you can turn dithering on in
Edit > Preferences > Audio - Playback and Recording to
compensate for the truncated data.
When you first install SONAR, the Wave Profiler profiles your sound card at all the bit depths that the
sound card supports, so when you change the playback bit depth, you don’t need to run the Wave
Profiler again (you do need to relaunch SONAR).
Here’s how to change the playback bit depth for a project:
To change playback bit depth
1. Go to Edit > Preferences > Audio - Playback and Recording and choose the bit depth you
want to use in the Audio Driver Bit Depth field.
2. Click OK .
To rewrite audio files at different bit depths
1. Use the Utilities > Change Audio Format command to open the Change Audio Format dialog
box.
2. Choose a new bit depth in the New Bit Depth field.
3. If you’re changing to 16 bits, you can check or uncheck the Apply Dither check box. Dithering
means to add a certain audio signal to 16 bit audio to make it sound more like it did as a higher-
bit signal.
4. Click OK .
SONAR rewrites the audio tracks in your project at the new bit depth.
Note:
• If you choose to play back at greater than 16 bits, you may need to pick a bit format for your
data in Edit > Preferences > Audio - Audio Profiles in the Stream > 16 Bit Data As field.
You may need to consult your sound card’s documentation to find the optimum setting.
• Some audio devices, especially USB devices that use WDM drivers, can not operate in 24-
bit mode unless a variable in SONAR’s
Aud.ini
file is set to 1. The variable is
Use24BitExtensible=<0 or 1>, which goes in the
[name of your audio device (‘n’
in, ‘n’ out)]
section of the
Aud.ini
file.
• SONAR 4 does not play back projects that contain files with different bit depths (SONAR 5
and later), so if you want to open a multiple bit depth project in SONAR 4, see the following
procedure or a conversion procedure.