CAKEWALK sonar x3, Справочное руководство

Страница: 1242 / 2094

1242
Instrument definitions
Creating instrument definitions
To add a bank or change the patch names for a bank
1. Drag a patch name list from the Names tree to the Patch Names for Banks folder of the
instrument you’re editing in the Instrument tree.
2. Enter a bank number, or enter -1 to indicate that this list of patch names should be used as the
default.
SONAR displays the updated banks and patch name lists. If necessary, SONAR adds a new bank to
the instrument definition.
To remove a bank or patch name list
1. In the Instrument tree in the Patch Names for Banks folder of the instrument you’re editing,
highlight the bank and patch names list.
2. Press the DELETE key, or right-click on the bank name and choose Delete from the pop-up
menu.
To set or clear the Drum flag
• Right-click on the bank in the Instrument tree, and choose Drums from the pop-up menu.
See also:
“Creating and editing patch name and other lists” on page 1238
“Copying name lists” on page 1239
“Assigning the Bank Select method” on page 1240
“Assigning patch names” on page 1241
“Assigning note names” on page 1243
“Assigning controller, RPN, and NRPN names” on page 1245