CAKEWALK sonar x3, Справочное руководство

Страница: 1221 / 2094

1221
The Meter/Key view
Notation and lyrics
Adding and editing meter/key changes
The Meter/Key view displays a list of all the meter/key changes in the project. You can add, delete,
or edit meter/key changes by clicking the buttons at the top of the view. You can also insert meter/
key changes into the project with the
Project > Insert Meter/Key Change command.
To add a meter/key change
1. Open the Meter/Key view.
2. Click Add , or choose Project > Insert Meter/Key , to open the Meter/Key Signature dialog
box.
Figure 374. The Meter/Key Signature dialog
3. Enter information about the new meter/key change.
4. Click OK .
SONAR inserts the meter/key change into the project. The meter/key change will appear in the Staff
view at the appropriate measure.
Property Meaning
At Measure The measure where the meter/key change takes place.
Beats per Measure The number of beats per measure, the upper number in the time signature.
Beat Value The note length of a beat, the lower number in the time signature. 2 corresponds
to a half note, 4 to a quarter note, 8 to an eighth note, etc.
Key Signature The key signature.
Table 211.