CAKEWALK sonar x3, Справочное руководство

Страница: 1202 / 2094

1202
Notation and lyrics
Chords and marks
Figure 371. The Chord Properties dialog
4. Click OK .
The Staff view displays the chord with the new properties, moving it to a new time if necessary.
To add a guitar chord grid
1. Right-click the chord symbol to open the Chord Properties dialog box.
2. Follow the instructions in the table:
3. Click OK .
The Staff view displays the chord with the new guitar chord grid.
To do this Do this
Display a blank chord grid Click New Grid
Place a dot on the grid Select the finger number (1-4, or T for Thumb), then click the grid at
the appropriate string and fret location
Assign an open string Select O, then click on the string
Assign a muted string Select X, then click on the string
Change the finger assigned to a dot Click the dot repeatedly to cycle through the fingers
Insert a fret designation Click to the right of the grid and enter the number of the index finger
fret in the
Chord Fret Number dialog box
Play the chord (Audition) Click Play
Remove the chord grid Click Remove Grid
Table 206.