CAKEWALK Sonar V-STUDIO VS-700, Руководство по началу работы

Страница: 24 / 64

24
Initial Settings
As described below, configure SONAR so that you can use the VS-700 as an audio driver.
You’ll need to make these settings in the following cases.
• Immediately after installing SONAR
• If you’ve updated the VS-700 driver
• If you’ve newly installed the VS-700 driver
Keep the VS-700 Owner’s Manual at hand.
Verify that the VS-700 is correctly recognized by SONAR.
1.
Choose “Options | Audio” to display the “Audio Options” dialog box.
2.
In the “Audio Options” dialog box, open the “Drivers” tab.
3.
Verify that the VS-700 driver is shown in the “Input Drivers” and “Output Drivers” fields.
Select (check) the following drivers, and clear (uncheck) any other drivers.
Audio Driver Settings
Select the Drivers
Input Drivers Output Drivers
VS-700 IN 1-2 VS-700 MAIN
VS-700 IN 3-4 VS-700 SUB
VS-700 IN 5-6 VS-700 OUT 1-2
VS-700 IN 7-8 VS-700 OUT 3-4
VS-700 IN DIGITAL1 VS-700 OUT 5-6
VS-700 IN DIGITAL2 1-2 VS-700 OUT 7-8
VS-700 IN DIGITAL2 3-4 VS-700 OUT 9-10
VS-700 IN DIGITAL2 5-6 VS-700 OUT DIGITAL1
VS-700 IN DIGITAL2 7-8 VS-700 OUT DIGITAL2 1-2
VS-700 AUX VS-700 OUT DIGITAL2 3-4
VS-700 ARX VS-700 OUT DIGITAL2 5-6
VS-700 FANTOM VS VS-700 OUT DIGITAL2 7-8
VS-700_Install_e.book 24 ページ ２００８年１１月２０日 木曜日 午後５時６分