18
Installation and Registration
The VS-700 Software installer includes the following:
• SONAR VS-700 Control Surface Plug-in
• Fantom VS Editor
• Rapture
• Rapture Expansion Packs
For more information, see
SONAR VS-700 software components
1.
Insert the included “SONAR V-STUDIO 700 CD-ROM” into your computer’s CD/DVD-ROM drive.
The
“VS-700 Setup”
AutoRun appears.
If AutoRun is not enabled, you can start the installer by selecting
Start-Run
and entering
d:\VS-700_Setup.exe
(where d:\ is your disc drive).
If the VS-700 CD-ROM is already in you computer’s CD/DVD-ROM drive, eject the CD-ROM and insert it again.
2.
Select “Install VS-700 Software.”
3.
Click [Next].
4.
To begin installation, click “Install.”
If SONAR 8 has already been installed, the VS-700 software will be installed. If SONAR 8 has not been installed
yet, the VS-700 software installer (VStudioSetup.exe) will be copied to your hard drive and installed
automatically by the SONAR 8 installer.
Installing the VS-700 Software
To Install the VS-700 Software
VS-700_Install_e.book 18 ページ 2008年11月20日 木曜日 午後5時6分
Содержание Sonar V-STUDIO VS-700
Страница 1: ...4 5 0 1 VS 700_Install_e book 1...
Страница 63: ...VS 700_Install_e book 63...
Страница 64: ...5 1 0 0 0 0 2 2 4 5 0 1 VS 700_Install_e book 64...