Cajun P220G, Руководство по конфигурации и эксплуатации

Страница: 40 / 135

Using VLANs, Spanning Tree, and Hunt Groups
Cajun P220G Switch Configuratiion and Operation Guide 3-3
Figure 3-2. Create VLAN Screen
Note: Use Table 3-1 to configure the VLAN parameters in steps 3-5:
Table 3-1. Create VLAN Parameters
3. Enter a name for the VLAN in the Name field.
4. Enter an unused VLAN ID (between 2 and 4095) in the ID field. VLAN IDs are
global and must be consistent from switch to switch. If you enter an existing VLAN
ID, an error message displays.
5. Use the Initial Hash Table Size pull-down menu to select the initial hash table size.
6. Click APPLY to create the new VLAN. Click CANCEL to return the display to the
current switch settings.
Name Name of string assigned to this VLAN.
ID Identifier used throughout the network to identify this VLAN. If
you want ports on more than one device to participate in a
particular VLAN, you must use the same VLAN ID to identify the
VLAN on every device.
Initial Hash Table
Size Sets the number of memory “buckets” used to store information
for this VLAN. Use the default value unless instructed to do
otherwise by a qualified Lucent service representative.
Auto Increment
HT Size Determines whether the number of memory “buckets” used by
this VLAN’s address table adjusts automatically when memory
use become inefficient. Use the default value unless instructed to
do otherwise by a qualified Lucent service representative.