Cajun P220G, Руководство по конфигурации и эксплуатации, Страница: 21 / 135

Configuring the P220G Gigabit Switch
2-6 Cajun P220G Switch Configuration and Operation Guide
) "& *#&
You can enter basic system identification information in the System Information screen
of the Web Agent. Use these fields to uniquely identify each switch. The fields are:
❒
Switch name
❒
Device location
❒
Administrator contact
To change these values, complete the following steps:
1. Select General from the menu on the left side of the Web Agent. The System
Information screen displays (Figure 2-2).
2. Enter a name for the switch in the Name field.
3. Enter the location of the switch (floor and closet location, for example) in the
Location field.
4. Enter information about the person who should be contacted in the event of a
problem with this switch in the Contact field.
5. Click APPLY to apply the settings. Click CANCEL to return the display to the
current switch settings.
++,- "& !
To set the system clock, complete the following steps:
1. Select System Clock from the menu on the left side of the Web Agent. The
System Clock screen displays (Figure 2-3).
Figure 2-3. System Clock Screen