Cajun P220G, Руководство по конфигурации и эксплуатации

Страница: 32 / 135

Configuring the P220G Gigabit Switch
Cajun P220G Switch Configuration and Operation Guide 2-17
Note: This value should NEVER be changed to Enable on inter-switch links.
5. Select a 3Com Mapping Table assignment if you want to specify how incoming
tagged frames from 3Com equipment are mapped to Lucent VLANs. Refer to the
“Creating 3Com Mapping Tables” in Chapter 3 for more information on 3Com
Mapping Tables.
6. Click APPLY to apply the changes. Click CANCEL to return the display to the
current switch settings.
)/& # #
"
Figure Figure 2-12 shows a P220G Switch connected to other vendors’ equipment. Use
Tables Table 2-7 through Table 2-9 for recommended switch port settings for each
connection type.
Figure 2-12. P220G Switch
Table 2-7. Example 1. Trunk to Cisco® Catalyst® 5000
Port VLAN Default, causes untagged packets to be assigned to the default
VLAN.
Trunk Mode Multi-level, causes the port to send frames using the
multilevel format.
VLAN Binding Bind to All, binds the port to all VLANs known to the switch.
Automatic VLAN
Creation Enable, causes the switch to learn new VLAN IDs that arrive at
the port, and then bind the port to these VLANs.
Cisco Catalyst
5000
Bay Networks
System 5000
3Com
SuperStack
1.
3.
2.
P220G