厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
23
Destination IP
: The destination IP address of static route, it can be a host or network
segment.
Mask
: Subnet mask of destination IP. If destination is a host, please set mask to
“255.255.255.255”.
Gateway
: Next-hop IP of static route. If there is no need to add a gateway, please set it
to “0.0.0.0”.
Metric
: Routing metric. The default value is 0.
MTU
: The maximum transmission unit. The default value is 1500.
Interface
: System interface.
Notice
: After adding a static route, if the rule doesn’t appear in the routing table
below, it means this rule has not been added successfully even if there is a
successful tip. If that happens, please check your settings.
4.3 VPN
4.3.1 GRE
Name
：
it is limited to use characters 0-9.a-z.A-Z
，
also can’t repeat name.
Remote IP
：
Remote public network IP
Remote Subnet
：
format is 192.168.1.0/24.
Interface IP address
：
The appointed virouteral interface IP address.
Local WAN IP
：
IP address used to create tunnel, if it is blank, it means to use WAN
