20
Output Setting (Output Power Level/Slope):
1. Output power level can be adjusted from 93
dBμV
to 113
dBμV
2. Slope rate can be changed from 0 to -9 dB
The more channels are added to CAP 532, the lesser output power you should give to each
channel.
Configuration Maintain:
a.
Software Update:
To update the software, press “OK” on Software update, then click “Yes” to start the update.
NOTE:
In case SW upgrade is needed, the software
package must be placed in the “Download” folder of
your mobile device as shown below:
