Thank you for purchasing a Caframo Kona Fan
Read and Save these Instructions
Installation:
Remove permanent installation bracket from fan base.
For quick mounting
apply moistened suction cup to a clean dry flat surface for
best adhesion. Feed cam lock through fan base, rotate the fan 90 ° and lock
suction cup into position.
For permanent installation
use four # 8 machine screws (not included) to
mount installation bracket and screw down fan base.
Operation:
The blade must be clear of any obstructions that would cause the
blade to jam. Secure cam lock tilt mechanism in position before turning on.
Rotate control knob clockwise to increase speed. Rotate control knob
counter clockwise to turn off.
Care and Maintenance:
Do not use suction cup if severe jarring conditions
exist. Can be used outdoors, resists splashing. Do not immerse in water.
Warning:
Do not position too close to any objects that may be drawn into
the blades and stop the air flow.
Do not use if power supply cord becomes frayed or brittle.
Do not use gasoline, thinners or other harsh chemicals to clean fan.
Do not use near fireplaces, furnaces, stoves or high temperature heat.
Specifications
Current Draw - 12 volts: 0.21, 0.26 and 0.37 amps (3 speed)
24 volts: 0.11 to 0.18 amps (Variable speed)
Ingress Protection Rating: IP55 against dust and spray
Warranty
: Limited 2-year warranty. Caframo warranty covers repair or re-
placement cost of fan only. Warranty does not cover incidental or consequen-
tial damages or costs.
817PK010Rev02
Cam lock
Suction cup
Fan base
Cam lock tilt mechanism
Permanent installation bracket
Kona
