background image

INNOVATION TOTAL LITE Rev. 11  05/2018

55

www.cafection.com      800-561-6162

SERVICE & INSTALLATION MANUAL for Innovation Series’ Total Lite

S

e

rv

ic

e Mo

d

e

6.6.5  Admin Subtab (Continued)

When a user activates the Free Vend or Carafe mode, the related button in Service mode 
highlights and indicates the name of the user who set it.

2.  This field is used to enter the serial number of the coffee brewer. For proper functioning 

of Cafection’s Management Tool, the serial number must be the same as the one on 
the sticker inside the machine, under the fan.

It is important to enter the serial number of the machine every time the flash card is 

replaced.

3.  This barcode is reserved for Cafection use.

4.  These fields are used to modify the levels 3 and 4 users’ passwords (see section 6.1).

If the passwords have been changed, lost or forgotten, a general reset must be 
performed. Contact Cafection’s Technical Support team for the procedure. Performing 
a general reset will reset all drink recipes, settings and passwords, but not the 
permanent sales count, the users list and the serial number.

Содержание Total Lite Innovation Series





















































































Отзывы: