Cafection Total Lite Innovation Series Скачать руководство пользователя страница 49

Страница: 49 / 84

INNOVATION TOTAL LITE Rev. 11 05/2018

www.cafection.com 800-561-6162

SERVICE & INSTALLATION MANUAL for Innovation Series’ Total Lite

e Mo

6.6.3 Tools Subtab

1. This button is used to calibrate

the screen. Follow the
calibration procedure shown on
the screen.

2. This button is used to set the time

and date of the brewer.

It is important to set the time
and date to ensure the proper
functioning of the following:
- Service Log.
- Email Alerts.
- Cafection’s Management Tool.
- Error Log.

3. This button is used to view the coin changer status.

If there is no coin changer in the machine or if it is

not plugged correctly, this button will not be visible.

4. This button is used to enter Manual Control mode and

manually test the machine components.

Warning! This mode is intended for advanced technicians. Risk of damages to the

machine or injuries.

5. This button is used to view the card reader status.

If there is no card reader in the machine or if it is not plugged correctly,

this button will not be visible.

6. This button is used to configure the coffee brewer during the initial setup. It provides

installation tips and requirements.

Содержание Total Lite Innovation Series





















































































Результаты поиска

Содержание Total Lite Innovation Series

Отзывы:

Похожие инструкции для Total Lite Innovation Series

Бренды по названию

Популярные бренды

Cafection Total Lite Innovation Series, Руководство по обслуживанию и установке

Результаты поиска

Содержание Total Lite Innovation Series

Отзывы:

Похожие инструкции для Total Lite Innovation Series

Бренды по названию

Популярные бренды