INNOVATION TOTAL LITE Rev. 11 05/2018
www.cafection.com 800-561-6162
46
SERVICE & INSTALLATION MANUAL for Innovation Series’ Total Lite
6.6
System Tab
To access the screen below, press the SW1 button (see section 4.15) on the main board inside the
door and select the System tab.
6.6.1 System1 Subtab
1. This drop-down menu is used to
set the language of the system. To
do so, select the desired language.
Press SAVE ALL (#10) and follow the
instructions on the pop-up window.
If the language is
changed, the products
names will be reset to
default values.
2. This field is used to set the quantity
of coffees to brew before showing the
"Waste Bin Full" alert. To disable this
alert, set the value to zero (0).
3. This field is used to set the water temperature in the tank, in Fahrenheit.
4. This field is used to set the minimum temperature of the water in the tank, in Fahrenheit. If the
water temperature drops below this setting, the coffee brewer will display an error message
until the temperature rises above this minimum. To disable this feature, set the value to zero (0).
5. This field is used to set the quantity of drinks to be ordered before a customer gets one for
free. To disable this function, set the value to zero (0). It is not recommended to use this feature
if the machine is equipped with an optional printer.
6. This field is used to set the quantity of drinks to be ordered before showing the "Rinse Required
Soon" alert. To disable this alert, set the value to zero (0).
7. These fields are used to set the name for the drinks families on the selection screen.
8. This button is used to reset the System1 and System2 tabs back to factory settings. This
action does not affect the recipes.
9. This button is used to reset all recipes back to factory settings (Information and Liquids & Ingr.
subtabs).
10. This button is used to save any parameters changes.
1
2
5
3
6
4
8
10
9
7
S
e
rv
ic
e Mo
d
e
