INNOVATION TOTAL LITE Rev. 11 05/2018
www.cafection.com 800-561-6162
66
SERVICE & INSTALLATION MANUAL for Innovation Series’ Total Lite
7.7.5 Stainless steel Coffee Chute
Frequency: monthly or every 1,000 cycles
With knocker (for previous brewer version)
1. Open the door of the machine.
2. Remove the filter paper.
3. Remove the grinder protector.
4. Unplug the 2 connectors from the solenoid.
5. Remove the stainless chute by removing the screw.
6. Clean the chute by rinsing it with hot water.
7. Make sure it is dry before reinstalling.
8. Repeat steps in reverse order to reinstall the chute and solenoid.
Stainless coffee
chute
Red connector (at
the front)
Stainless coffee
chute screws
Black connector
(at the back)
Without knocker
1. Open the door of the machine and remove the front panel.
2. Insert the chute cleaning brush (included with the
machine) up to the very end of the chute.
3. Brush the walls from left to right and up and down.
To avoid damages, make sure the metal portion of the
brush does not touch the walls of the chute.
4. Get the brush out and wipe it clean.
5. Brush the chute a second time by repeating steps 2 to 4.
6. Perform a rinse cycle.
7. Reinstall the front panel and close the door.
P
re
v
e
n
ti
v
e Ma
in
te
na
nc
e
