INNOVATION TOTAL LITE Rev. 1 2021-10
www.cafection.com 800-561-6162
28
SERVICE & INSTALLATION MANUAL for Cafection’s Total Lite
4.15.1 Main Board (PCB) Description
Interactive Switches and Buttons
1. SW1 Setup Button (White)
This button gives access to the
parameters of the machine and
products through Service mode
(see section 6.2 for details).
2. SW2 Service Button (Black)
There are two functions for this
button:
-If you press it while the screen is in
selection mode, you will enter in the
touch screen calibration utility.
-If you press it while the screen
is in service mode you will have a
factory reset pop-up menu. This
pop-up menu enables you to reset
many settings back to factory:
Configuration settings, passwords
and drink settings.
LEDs light up to indicate
the following statuses:
DS1
Power 5V OK
DS15
Low water level
DS13
Brewer out of park position
DS14
Filter paper roll detected
DS18
Water detected in the drip tray
DS20
Power 3.3V OK
DS30
Computer COM indicator
LEDs light up to indicate
the following parts are in use:
24V DC outputs:
DS2
Ingredients motor (coffee # 1)
DS3
Ingredients motor (coffee # 2)
DS4
Ingredients motor (soluble # 2)
DS5
Ingredients motor (soluble # 1)
DS6
Hot water valve (coffee)
DS7
Hot water valve (soluble)
DS8
Hot water dispense valve
DS21
Coffee chute solenoid
DS23 Auxiliary
DS24
Ingredients motor (coffee # 3)
DS25 Fan
DS29
Soluble whipper motor
120 V AC outputs:
DS9
Brewer motor
DS12 N/A
DS11
Coffee bean grinder
DS10
Water inlet valve
In
it
ia
l S
e
tu
p