ENCORE VENTI Rev. 3 2021-10
5
www.cafection.com 800-561-6162
SERVICE & INSTALLATION MANUAL for Cafection's Encore Venti
S
a
fe
ty In
s
tr
u
c
tio
n
s
1
SAFETY INSTRUCTIONS
Basic safety precautions should always be followed when using electrical appliances.
Read all instructions before using this brewing equipment.
1.1
Food-Contact Parts
Cafection recommends cleaning and sanitizing all parts in contact with food prior to installation
and use.
See Cleaning and Sanitizing (section 7) for more details.
1.2 Warnings
To minimize the risk of fire or electric shock, do not expose this equipment to rain or moisture.
Do not immerse this equipment in water; it could lead to electric shock or other malfunctions.
Do not use this equipment other than for its intended use.
This equipment contains hot water. Never move it when full.
This brewing equipment is intended for indoor use only.
1.3
Power Supply
Always use a grounded 120 V AC 60 Hz socket outlet rated for 15 A service.
OPTIONAL:
Use a grounded 220 V AC 60 Hz socket outlet rated for a 20 A service.
Each brewing equipment must have its own electrical outlet, on a dedicated circuit.
Extension cords must not be used.
This brewer is equipped with a polarized alternating current line plug (one blade wider than the
other).
Only use this plug with an outlet in which the prongs can be fully inserted.
1.4
Disconnect the equipment if:
- Damage is done to the power cord.
- The equipment does not work properly.
- The temperature of the power cord or plug increases dramatically during use.
- Unusual conditions occur.
- Whenever a part has to be changed, plugged or unplugged.
FAILURE TO COMPLY CAN CAUSE EQUIPMENT DAMAGE, FIRE OR SERIOUS
INJURIES.
''INITIAL SETUP'' SECTION OF THIS MANUAL MUST BE COMPLETED BEFORE
PLUGGING IN THE BREWER.
