ENCORE VENTI Rev. 3 2021-10
www.cafection.com 800-561-6162
24
SERVICE & INSTALLATION MANUAL for Cafection's Encore Venti
ALWAYS unplug the main power cord from the power outlet (AC line voltage) when
servicing any electrical component on the equipment.
4.10 Electrical Connection
This equipment must be installed in compliance with applicable federal, state,
provincial and/or municipal electrical codes having jurisdiction.
Make sure:
- The equipment is OFF before plugging it in.
- The equipment has its own electrical outlet.
- NO extension cord is used.
1. Make sure the power switch at the back of the unit is in the OFF position before plugging in the
unit into its own grounded electrical outlet.
2. Access the back of the brewer and toggle the power switch to the ON position. Water will
automatically enter the brewer. The fill cycle should take a maximum of 2 to 3 minutes.
3. Once the tank is full, water will take 10 to 20 minutes to heat to brewing temperature.
4. Once the coffee machine is ready, the selection screen will appear.
OFF position
In
it
ia
l S
e
tu
p
