ENCORE LITE Rev. 3 05/2018
www.cafection.com 800-561-6162
62
SERVICE & INSTALLATION MANUAL for Cafection's Encore Lite
7.8
Interior Parts Cleaning & Sanitizing
For food safety reasons, do not use soap or detergent to clean the inside of the brewer. Use hot
water or chemical products recommended by the manufacturer. Wiping with towels or cloths can
recontaminate sanitized food-contact surfaces. Therefore, it is recommended to air dry completely
all sanitized food-contact surfaces before reinstalling them in the machine.
Brush away coffee grounds and particles inside the brewer using the brush for coffee grounds and
a small dust pan, then clean the inside with hot water.
Interior parts to be cleaned:
- Bean hopper.
- Bean hopper plastic funnel.
- Soluble canisters.
- Soluble whipper assembly.
- Brew group assembly.
- Fan.
- Stainless coffee chute.
7.8.1 Bean Hopper
Frequency: monthly or every 1,000 cycles
It is recommended to remove, empty and
clean the hopper every month to avoid
coffee oil and soils to accumulate on
the walls of the hopper and alterate the
beverage quality.
1. Unlock the bean hopper. The lock is
located on top of the lid.
2. Remove the bean hopper back plate.
3. Push the bean hopper backward and
lift it.
4. Clean and sanitize under hot water and
air dry completely.
5. Repeat steps in reverse order to
reinstall.
6. Order a large coffee to ensure that all
parts and switches are working properly.
Bean hopper
Bean hopper
back plate
C
le
an
in
g
an
d
San
it
iz
in
g
